HA90-A1
Hammer
Exhaust system works,
pipe removal ,
body shop and shock work,
scraping rust,bolt cutting ,
bushing driving,
shearing and front end work.
pipe removal ,
body shop and shock work,
scraping rust,bolt cutting ,
bushing driving,
shearing and front end work.
Features
·T-Handle ergonomic design to achieve overall balance to the tool reducing the fatigue for long time operation.
·Shock reduction device gives users easily handle the tool and less fatigue.
·"One piece " over-molding grip at end housing for comfort holding shock cushion and anti-skipping.
·Feather trigger for operator precise speed control.
·Handle exhaust to keep the dust blowing away from the operator.
·Swivel air inlet to keep air hose from being twisted and kinked.
·Quick-change retainer allows for faster chisel changeovers , so you can get the job done.
·Shock reduction device gives users easily handle the tool and less fatigue.
·"One piece " over-molding grip at end housing for comfort holding shock cushion and anti-skipping.
·Feather trigger for operator precise speed control.
·Handle exhaust to keep the dust blowing away from the operator.
·Swivel air inlet to keep air hose from being twisted and kinked.
·Quick-change retainer allows for faster chisel changeovers , so you can get the job done.
Specification
| Model | HA90-A1 |
| Shank Opening | in. : 0.401 / mm : 10.18 |
| Blows Per Min | 2000 (B.P.M) |
| Bore Diameter | in. : 3/4 / mm : 19.05 |
| Stroke Length | in. : 3-1/2 / mm : 89 |
| Weight | Lbs : 4.28 kgs : 1.94 |
| Overall Length | in. : 10.49 / mm : 266.4 |
| Ave. Air Consumption | CFM : 2.77 / I/min : 77.6 |
| Vibration | 5.75 (m/s2) |
 |  |  |  |  |  |  |  |  |  |
| CR-1 Edging Tool | CR-2 Spot Weld Buster | CR-3 Straight Chisel | CR-4 Single Blade Panel Cutter | CR-5 Tapered Punch | CR-6 Angle Scaling Chisel | CR-7 Muffler Remover Tool | CR-8 Spot Weld Cutter | CR-9 Cutoff & Ripping Tool | CR-10 Tail Pipe Cutter |
 |  |  |  |  |  |  |  |  |  |
| CH-1 HEX Edging Tool | CH-2 HEX Spot Weld Buster | CH-3 HEX Straight Chisel | CH-4 HEX Single Blade Panel Cutter | CH-5 HEX Tapered Punch | CH-6 HEX Angle Scaling Chisel | CH-7 HEX Muffler Remover Tool | CH-8 HEX Spot Weld Cutter | CH-9 HEX Cutoff & Ripping Tool | CH-10 HEX Tail Pipe Cutter |
 Quick Change Retainer |  Spring Retainer |  NS-A1 19 steel needles removes rust, scale, paint, and weld splatter from irregular surfaces | |||||||
